Table of Contents
Advertisement
3.
Model
Model
PHS-864
4.
Technical Specification
Function
Power Supply
Electricity Testing
Range
Available Clamp
Wire Size
LED Display
Buzzer
Battery Check
Magnet
Phase detection(positive phase, anti-phase, default phase), live line
detect, simple power electricity detect, break point location, lines
maintenance
DC 3V AA alkaline batteries (LR6)×2PCS,continuous working for 70hours
AC 70～1000V，45～65Hz (sine wave continuous input)
Diameter: ø1.6mm-ø16mm
[Positive phase] The phase detector lamp lights up clockwise
[Anti-phase] The phase detector lamp lights up counterclockwise
[Electricity Testing] L1, L2, L3 lamps light up in setting voltage range
[Default phase] L1 or L2, or L3 lamp will not light up
[Open circuit] L1 or L2, or L3 lamp will not light up
[Positive phase] the buzzer sounds intermittently
[Negative phase] the buzzer sounds continuously
The POWER indication lamp lights up after boot up; the LOW BATTERY
lamp lights up when low battery
4pcs magnets are installed on the bottom plate of the meter, which can
be attached to the distribution box, load weight 800g
Diameter of wires can be clamped
ø1.6mm-ø16mm
3
Advertisement
Table of Contents
