Firing Rates - Riello RS 68/EV BLU Installation, Use And Maintenance Instructions

4.7

Firing rates

The maximum output is chosen within area A (and B for
RS 120/EV BLU) of the diagram (Fig. 2).
to use area B (RS 120/EV BLU) as well, the pre-
calibration of the combustion head is necessary,
as explained in the paragraph "Pre-calibrating
the combustion head" on page 25.
WARNING
The minimum output must not be lower than the minimum limit
of the diagram.
RS 68/EV BLU
Thermal power
RS 160/EV BLU
20068463
Technical description of the burner
Thermal power
The firing rate (Fig. 2) of the model RS 200/EV
BLU refers to the operation with fuel G20 - G25.
In case G31 is used, the minimum output goes
CAUTION
from 550 to 630 kW.
The firing rate (Fig. 2) was obtained considering a
room temperature of 20°C and an atmospheric
pressure of 1013 mbar (approx. 0 m above sea
level), with the combustion head adjusted as
WARNING
shown at page 25.
RS 120/EV BLU
RS 200/EV BLU
10 GB
D9600
Thermal power
Thermal power
Fig. 2