Adjusting The Recording Level; Recording An Entire Cd - Philips CDR-600 User Manual

xp CDR 600/17 English 20-03-2001 13:27

Adjusting the recording level

Some analog sources have such high output levels, that you
may need to adjust the recording level to ensure good
quality recordings without distortion.
1 Place an unfinalized CD(RW) disc, absolutely free of
scratches and dust particles in the CD recorder tray.
2 Press SOURCE repeatedly to select the ANALOG input
lights up and ANALOG will appear on the
ANALOG
display.
3 With the CD recorder stopped, press RECORDING TYPE
three times to select REC MANUAL.
d starts to flash and the display shows
PRESS RECORD.
4 Start the source by pressing PLAY/PAUSE 2;.
DO NOT start recording!
5 Rotate the EASY JOG/ENTER key to decrease the record
level until, on the Record/Play Level bar, all the blue
segments are alight, but the red segments do not light
continuously during the loudest passages.
6 Press STOP 9 on the CD recorder and on the source.
The adjusted recording level is stored in the memory
of your recorder (also when powered off!).
Note:The recording level can also be adjusted for digital or
optical recordings after selecting the DIGITAL 1 or
OPTICAL input.
Pagina 19

Recording an entire CD

This feature enables you to make fast and easy copy of an
entire CD to CD, make a compilation CD or archive an
entire LP or cassette on CD.
Preparing
1 Place an unfinalized recordable disc, absolutely free of
scratches and dust particles in the CD recorder tray.
2 Press SOURCE repeatedly to select the type of connection
you made to your source of recording. Examples:
- CD-player is connected with its digital out connector
directly to the digital in connector of your CD-recorder:
connection is DIGITAL I.
- CD-player is connected with its analog out connectors
directly to analog in connectors of your CD-recorder:
connection is ANALOG
- Turntable is connected with its analog out connectors to
amplifier/receiver which is connected to the analog in
connectors of your CD-recorder: connection is ANALOG
DIGITAL I
DIGITAL 1, OPTICAL or ANALOG will appear on
the display.
3 With the CD recorder stopped, press REC TYPE to select
REC DISC for recording of an entire CD or a program of
tracks.
d and sync start to flash and the display shows the
selection.
If the input label
switch on the external source or check the digital
connection.
Notes:
If you are recording from a digital source (OPTICAL or
DIGITAL 1) and want to finalize the CD automatically after
recording, press RECORDING TYPE until the option MAKE CD
is selected.
If you planned to record a compilation of tracks, be sure to
have programmed a selection of tracks on the CD-player or
CD-changer from which you are going to record.
Recording
, or lights up and
OPTICAL I ANALOG
or also flashes,
DIGITAL I OPTICAL
19