Erasing Cdrw Discs Content; Playing A Cd; Selecting A Track - Philips CDR-600 User Manual

xp CDR 600/17 English 20-03-2001 13:27

Erasing CDRW discs content

For unfinalized CDRW discs only!
You can erase:
- Tracks can only be erased from the end.
- With the EASY JOG you can select more then one track
to be erased simultaneously.
Note: It is not possible to erase tracks within the sequence.
- It is also possible to erase the entire disc at once.
To erase one or more tracks from the end:
1 Press ERASE once.
The display will show the number of tracks and their
total playing time. ERASE TRACK and PRESS
RECORD will light up.
If the disc is finalized, will appear on the display after
CD
0
inserting a CDRW in the recorder.The recorder will ask
you to confirm unfinalizing first. Confirm by pressing the
EASY JOG/ENTER key or ENTER on the remote control.
2 Select the track(s) you wish to erase by turning the EASY
JOG/ENTER key to the left.
The selected track numbers will start blinking on the
track bar.
The display will show the remaining time after erasing
the selected track(s).The track shown will be included
in the tracks erased.
3 Press RECORD.
The display will show the total countdown time and
ERASE.
After the selected track(s) has/have been erased, the
display will show the number of remaining tracks and
their total playing time.
To erase the entire disc:
1 Press ERASE twice.
The display will show the number of tracks and their
total playing time. ERASE DISC and PRESS
RECORD will light up.
If the disc is finalized, will appear on the display after
CD
0
inserting a CDRW in the recorder.The recorder will ask
you to confirm unfinalizing first. Confirm by pressing the
EASY JOG/ENTER key or ENTER on the remote control.
2 Press RECORD.
The display will show the total countdown time and
ERASE The entire disc will be erased.
Erasing an entire disc may take up to 15 seconds.
Pagina 23

Playing a CD

1 Press PLAY/PAUSE 2; to start CD play.
2 will light up and the track number and track time of
the track in play will appear on the display.
2 Press Display once, twice or three times to see:
Remaining track time, total remaining time, permanent
text information and track time (see Menu mode).
3 To interrupt play temporarily, press PLAY/PAUSE 2; again.
; will light on the display
4 To continue play, press PLAY/PAUSE 2; again.
5 To stop play, press STOP 9.
The number of tracks and the total playing time will
appear on the display.

Selecting a track

Selecting a track during play
1 Turn the EASY JOG/ENTER key until the required track
number appears on the display.
Play will skip to the beginning of the selected track.
Selecting a track when CD play is stopped
1 Turn the EASY JOG/ENTER key until the required track
number appears on the display.
2 Press EASY JOG/ENTER or ENTER on the remote control
to confirm or press PLAY/PAUSE 2; to start playing.
Note:You can also enter the required track number using the
numerical keys on the remote control. For 2 digit numbers,
press the keys in rapid succession.
Recording / Playing
23