Bosch MultiTalent 3 Plus Instruction Manual page 29

Tool Speed Time
M
Fig. F shows guide values for the maximum quantities and processing times when
working with the universal cutter jug and the blade inserts.
Printed on 100% recycled paper
Recipes / Ingredients / Processing
Honey and hazel nut spread (CNCM12C)
– 20 g hazelnuts
– 80 g blossom honey (room temperature)
■ Put the nuts in the universal cutter jug and cut with the blender/
cutting blade for 5 seconds on setting M.
■ Remove the universal cutter jug, turn it over and take out the
blade insert.
■ Add the honey. Close the universal cutter jug again with the
blade and put on the base unit.
■ Wait until all the honey has run down over the blade. Then mix
everything for 5 seconds on setting M.
Recipes / Ingredients / Processing en
29