Reverse Side - Samsung DM82D User Manual

Reverse Side

― The color and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
RS232C IN
RS232C
OUT
IR /
AMBIENT
SENSOR IN
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
AUDIO
OUT
SD CARD
USB
(5V 1A)
USB
(5V 1A)
DVI /
MAGICINFO IN
DP IN
HDMI IN 1
HDMI IN 2
RGB IN DP OUT
HDMI IN 3
IR
ANT IN RJ45
COMPONENT IN OUT
Port
RS232C IN
RS232C OUT
IR / AMBIENT SENSOR IN
RGB / DVI / HDMI / AV / COMPONENT
AUDIO IN
AUDIO OUT
SD CARD
USB (5V 1A)
DVI / MAGICINFO IN
DP IN
HDMI IN 1, HDMI IN 2, HDMI IN 3
RGB IN
DP OUT
ANT IN
AV IN / COMPONENT IN
IR OUT
RJ45
Description
Connects to MDC using an RS232C adapter.
Supplies power to the external sensor board or receives the light sensor signal.
Receives sound from a PC via an audio cable.
Connects to the audio of a source device.
Connect to an SD memory card.
Connect to a USB memory device.
― The USB ports on the product accept a maximum constant current of 1A. If
the maximum value is exceeded, USB ports may not work.
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
Connects to a PC using a DP cable.
Connects to a source device using an HDMI cable.
Connects to a source device using a D-SUB cable.
Connects to another product using a DP cable.
Connect to an antenna cable.
Connects to a source device using the AV/Component adapter.
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
Connects to MDC using a LAN cable.