Loading Media In Peel-Off Mode - Wasp WPL4M Series User Manual

3.3.2 Loading Media in Peel-off Mode

1. Please refer to
2. Remove 1~2 labels from
3. Press each side of media
- 17 -
subsection
3.3.1 to loading the media
roll into the printer.
Note:
Please calibrate the gap/black
mark sensor after loading
media in peel-off mode. Turn
on the printer and open/close
the media cover then it will
calibrate the sensor
automatically.
the liner.
cover to close the media
cover and make sure the
media cover closed
correctly.