Table of Contents
Advertisement
Establishing the network connection using a LAN cable
The optional XKM 3200 WL PLT communication module is required for wired network
connection.
On the supervisor level, select using the or arrow buttons.
Then select the COM module using the or arrow buttons.
Confirm with the / sensor control.
Connect the appliance to your router/switch using the network cable. The router/switch
must be connected to the Internet.
The appliance is now successfully connected.
Technical data
System requirements for WiFi
- WiFi 802.11b/g/n
- 2.4 GHz band
- WPA/WPA2 encryption
- DHCP activated
- Multicast DNS / Bonjour / IGMP snooping activated
- Ports 443, 80, 53 and 5353 open
- IP DNS server = IP standard gateway/router
- Mesh/repeater use: same SSID and password as standard gateway/router
- SSID must be permanently visible
System requirements for LAN
- DHCP activated
- Multicast DNS / Bonjour / IGMP snooping activated
- Ports 443, 80, 53 and 5353 open
- IP DNS server = IP standard gateway/router
Connectivity
33
Advertisement
Table of Contents
