Operation; Control Panel - Quick SBC 1100 NRG+ FR Manual Of Installation And Use

OPERATION

CONTROL PANEL

The control panel is made up of 6 LEDs:
no.1 LED STATUS, no.1 LED ERROR, no. 4 LED OUT CURRENT
The information supplied by the LEDs are listed as below:
LED STATUS
LED COLOUR
OFF
GREEN
ORANGE
RED
QUICK FLASH
SLOW FLASH
SHORT GREEN PULSE
GREEN PULSE
LED ERROR
LED COLOUR
OFF
FLASHING
RED
LED OUT CURRENT
LED COLOUR
RED
ORANGE
ORANGE
GREEN
F
Remark: the OUT CURRENT LEDs flash when the current sharing mode is enabled.
+
SBC NRG HIGH REV001B
DESCRIPTION
No mains power or active errors
FLOAT phase
ABSORPTION phase
BULK phase
Active power reduction
Active charge compensation
Active monitor mode
Active Stand-by mode
DESCRIPTION
No problem
Problem with manual reset (see code page errors table)
Problem with automatic reset fault (see code page errors table)
DESCRIPTION
Output current is >75% of the max current
Output current is >50% of the max current
Output current is >25% of the max current
Output current is >2% of the max current
OPERATION
EN
LED STATUS
LED ERROR
LED OUT CURRENT
23