WARNING: children should be supervised to ensure that they do not play with the appliance. “Quick ” battery chargers have been designed and made for the reasons described in this user’s manual. The “Quick ” ®...
INSTALLATION NECESSARY EQUIPMENT FOR INSTALLATION Use the batteries and cables on the output terminals as specified in the following table: MODEL SBC 140 NRG+ FR SBC 250 NRG+ FR SBC 300 NRG+ FR SBC 500 NRG+ FR SBC 365 NRG+ FR 12 V 24 V Battery voltage...
Page 4
AC mains and by means of a battery isolator from the batteries. WARNING: in cases where the AC power cord could be damaged, have this changed by a “Quick ” service centre.
INSTALLATION - OPERATION BATTERY TYPE SELECTION The battery charger can be set to optimize the charge according to the type of battery used. The selection of the type of charge is made via the rotary switch placed in the terminal board area, as indicated in Fig. 2. WARNING: select the battery type only when the battery charger is switched off.
Page 6
The battery charger, due to an internal malfunction, supplied for a very 2 LEDs on short time a higher voltage than the rated value. alternated The problem requires a check by a Quick customer service. ® with 3 LEDs off...
With supply voltage equal to 120 Vac and output current equal to the maximum nominal value. Protection may be inefficient in some operative conditions. QUICK RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT PRIOR NOTICE.
Need help?
Do you have a question about the SBC NRG+ Series and is the answer not in the manual?
Questions and answers