Setting Screen - Mettler Electronics Sonicator Plus 941 Instruction Manual

Setting Screen

Screen/Sound screen
Config.
Brightness
5
4
1
3
2
1
Initialization
1 Brightness setting buttons
These buttons are used to set screen brightness.
2 Key sound setting button
This button is used to set the volume of the key sound.
Touch this button to display a sound level setting sub-window.
3 Error sound setting button
This button is used to set the volume of the error sound.
Touch this button to display a sound level setting sub-window.
4 Treatment melody selection button
This button is used to select the type of melody to ring during treatment.
5 Treatment melody sound level setting button
This button is used to set the volume of the treatment melody.
Touch this button to display a sound level setting sub-window.
6 End melody selection button
This button is used to select the type of melody to ring at the end of treatment.
7 End melody sound level setting button
This button is used to set the volume of the end melody.
Touch this button to display a sound level setting sub-window.
8 Contact sound setting button
This button is used to set the contact sound to ring during ultrasound therapy.
A sound rings when the Ultrasound Probe is in contact with the treatment area.
A sound rings when the Ultrasound Probe is not in contact with the treatment area.
Screen/Sound
Key sound
2
Treatment melody
4
A
Contact sound
8
≦
US Indication Language
Error sound
3
End melody
5
6
A
9
[Sound level setting sub-window]
7
10
0 K