1. Manuals
  2. Brands
  3. Tubeline Manuals
  4. Farm Equipment
  5. TL70LSV
  6. Operator's manual

Tubeline TL70LSV Operator's Manual

Balewrapper
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Tubeline Manufacturing Limited
6455 Reid Woods Drive RR #4
Elmira, Ontario, Canada N3B 2Z3
Email:
sales@tubeline.ca
Fax: 519.669.5808
Tel: 519.669.9488
Toll-free (North America): 1.888.856.6613
www.tubeline.ca
Operator's Manual
Keep this manual with the machine at all times.
Balewrapper
TL70LSV
Do not attempt to operate this machine without thoroughly
reviewing this manual for safe and proper operation.
Rev. 1-0
PRINTED IN CANADA
46951

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TL70LSV and is the answer not in the manual?

Questions and answers

Related Manuals for Tubeline TL70LSV

Summary of Contents for Tubeline TL70LSV

  • Page 1 Tubeline Manufacturing Limited 6455 Reid Woods Drive RR #4 Elmira, Ontario, Canada N3B 2Z3 Email: sales@tubeline.ca Fax: 519.669.5808 Tel: 519.669.9488 Toll-free (North America): 1.888.856.6613 www.tubeline.ca Operator’s Manual Keep this manual with the machine at all times. Balewrapper TL70LSV Do not attempt to operate this machine without thoroughly reviewing this manual for safe and proper operation.

  • Page 2: Advantages To High Moisture Hay

    Operator’s Manual Thank you for choosing the Tubeline TL70LSV Balewrapper. Our hope is that it will give you many years of productive service. This machine is designed to wrap bales in a continual line with plastic film. Please read and understand this manual and the machine before operating.
  • Page 3 Warranty coverage is null and void unless Warranty Registration form has been completely filled in and is on file at Tube-Line Manufacturing Ltd. NOTE: Newest manual version can be found at www.tubeline.ca/support Operator’s Manual - Balewrapper TL70LSV...

  • Page 4: Table Of Contents

    Wrapping Site ............... . 6-4 Balewrapper TL70LSV - Table of Contents...
  • Page 5 Wireless Film Sensor Operation ............14-2 Table of Contents - Balewrapper TL70LSV...
  • Page 6 Suspension Axle Installation ............20-1 Imperial Torque Value Chart Metric Torque Value Chart VIII Balewrapper TL70LSV - Table of Contents...
  • Page 7 Intentionally Left Blank...

  • Page 8: Section 1: General Information

    In an emergency, the bales can be left 12 to 16 hours. The Tubeline wrapper makes timely harvest possible by reducing the dependence on the weather. It is much easier to get to wilt silage than to make dry hay. This also extends the working day, as the correct moisture to bale extends earlier and later in the day.

  • Page 9: Orientation

    Final Bale Pushoff Bale Deck Hoop Bale Ram Plastic Film Plastic Film Carrier Right Safety Guard Bale Trigger Wrap Chamber Directional Control Valve Roller Bed Control Panel Left Safety Guard Plastic Film Carrier Section 1: General Information - Balewrapper TL70LSV...

  • Page 10: Section 2: Safety

    Reinstall any removed shields BEFORE operating. • Inspect machine before operating. DO NOT operate this machine while under the influence of drugs or alcohol. • • DO NOT let children ride or operate this machine. Balewrapper TL70LSV - Section 2: Safety...

  • Page 11: Personal Protective Equipment

    They connect to power unit’s 7-pin receptacle. 7 Pin Connector Wiring: WIRE FUNCTION White Ground Yellow Amber Running Light / Left Turn Green Amber Running Light / Left Turn Brown Red Brake Lights 7-Pin Connector Front Section 2: Safety - Balewrapper TL70LSV...

  • Page 12: Clearance Markers

    Clearance Markers Part No: DEAMBER Part No: DERED Balewrapper TL70LSV - Section 2: Safety...

  • Page 13: Safety Decal Locations

    Safety Decal Locations NOTE: Decals shown are not to scale. Section 2: Safety - Balewrapper TL70LSV...
  • Page 14 Decal Made In Canada DE45925 Decal - Small SIS 30kmh Intl Models DE45927 Decal - Small SIS 20mph US Models DE45926 Decal - Large SIS 30kph Intl Models DE45928 Decal - Large SIS 20mph US Models Balewrapper TL70LSV - Section 2: Safety...

  • Page 15: Safety Decal Illustrations

    Part No: DE36082 Item: 8 Positive charging terminal for use a battery boost. Route plastic film through rollers as shown for each new roll. Part No: DE30881 Item: 7 Wrap tape can be stored on this holder . Section 2: Safety - Balewrapper TL70LSV...
  • Page 16 Part No: DE43049 Item: 16 Keep clear of wheels when machine in operation and transportation . Balewrapper TL70LSV - Section 2: Safety...
  • Page 17 Part No: DE46919 Item: 23 Match pin hole with desired bale size when adjusting left bale saddle. Part No: DE46918 Item: 22 Match pin hole with desired bale size when adjusting right bale saddle. Section 2: Safety - Balewrapper TL70LSV...
  • Page 18 Small Speed Indicator Sign for United States machines . Part No: DE45926 Item: 30 Part No: DE45928 Item: 31 Large Speed Indicator Sign for international machines. Large Speed Indicator Sign for United States machines. Balewrapper TL70LSV - Section 2: Safety...
  • Page 19 Optional Decal Illustrations Part No: DE23967 (Req. Powerdrive Option) Decal shows hydraulic lever function for driving the machine forward or reverse. 2-10 Section 2: Safety - Balewrapper TL70LSV...

  • Page 20: Section 3: Control Panel

    7. 3-way Center Return LEFT-RIGHT Steering Switch This switch will return to default neutral position when released. Turn switch left or right to steer the bale wrapper left or right. This function applies to both wrap modes. Balewrapper TL70LSV - Section 3: Control Panel...

  • Page 21: Control Panel Functions - Optional

    Switch toggle to front position use key switch, disabling Remote Start option or switch toggle to back position to enable Remote Start option (does not disable standard engine key switch start). Control panel must also be on. Section 3: Control Panel - Balewrapper TL70LSV...

  • Page 22: Section 4: Adjustments

    B. Hoop Start Limit Switch Starts hoop rotation in auto wrap mode when tripped. No function in manual wrap mode. C. Bale Ram Home Limit Switch Completes auto bale wrapping cycle by stopping bale ram retract when tripped. Balewrapper TL70LSV - Section 4: Adjustments...

  • Page 23: Bale Ram Limit Switch Adjustments

    4. Set limit switch to trip when bale joint is halfway through the wrap chamber. 5. Set limit switch to fully extended for final bale pushoff operation, refer to pg.7-3 Section 4: Adjustments - Balewrapper TL70LSV...

  • Page 24: Plastic Film Installation

    2. Lift handle and insert hoop lock pin through hole in hoop to lock plastic wrap carrier to desired Fig.1. height. See Fig.1 3. Unfasten rubber latch from inner rear of left safety guard. See Fig.2. Fig.2 Balewrapper TL70LSV - Section 4: Adjustments...
  • Page 25 13. Tie loose end of plastic to bale guide hook. 14. Close left safety guard, secure with rubber latch. NOTE: Rotate hoop and repeat steps 1-14 if other plastic wrap carrier requires reloading. Fig.6 Section 4: Adjustments - Balewrapper TL70LSV...

  • Page 26: Twin Wrap Kit Adjustments

    Fig.1 to change twin wrap plastic rolls: 1. Remove linchpin. 2. Lift latch to unlock spool holder. 3. Pull spring spool holder out enough to remove the empty plastic roll from the spools. Fig.1 Balewrapper TL70LSV - Section 4: Adjustments...
  • Page 27 8. Route twin wrap plastic film over the roller and under the existing standard plastic film roll. See Fig.2. 9. Route both overlapping plastic film ends through standard film carrier rollers as specified on pg.4-4 Fig.2 Section 4: Adjustments - Balewrapper TL70LSV...

  • Page 28: Bale Saddle Adjustment

    Bale Saddle Adjustment The TL70LSV has moveable bale saddles to allow various bale sizes to be wrapped. To adjust the bale size: Fig.1 1. Look at decals on front of wrapper for bale saddle position. See Fig.2. NOTE: Bale sizes and positions on decals are a reference only. Bales may differ from recommended position due to baler settings, firmness, weight, etc.

  • Page 29: Section 5: Hydraulic Functions

    • If equipped with power drive option, push left control valve lever (D) to drive machine forward, pull lever to move machine backwards. Fig.1 Shown with optional Power Drive lever . Section 5: Hydraulic Functions - Balewrapper TL70LSV...

  • Page 30: Steer Speed Needle Valve Adjustment

    It is used to control the speed of steering. Rotate right to restrict hydraulic flow which slows the • steering speed. Rotate left to allow more hydraulic flow, speeding up • steering. Balewrapper TL70LSV - Section 5: Hydraulic Functions...

  • Page 31: Section 6: Setup

    Section 6: Setup Dealer Installation Upon delivery the following parts will need to be installed to make the TL70LSV field ready: 1. Refer to Parts Manual to ensure all hardware and parts have been delivered. 2. Remove all banded parts from either bed deck or roller bed.

  • Page 32: Battery Hookup

    12. Install Dispatch Arm option, if applicable. Refer to pg.14-1 Fig.3 Battery Hookup TL70LSV bale wrappers are shipped with the battery disconnected for safety reasons. 1. Locate battery at middle right of balewrapper. See Fig.1. 2. Reconnect by simply bolting unhooked positive (+) red cable to its matching battery terminal (A).

  • Page 33: Dispatch Arm Installation

    2. Use a lifting device to raise dispatch arm assembly. 3. Slide dispatch arm into left ram tube. Bolt with bolts and nuts. Fig.1 4. Lower dispatch arm to ensure it fits into right side pocket. See Fig.2. Fig.2 Section 6: Setup - Balewrapper TL70LSV...

  • Page 34: Pre-Operating Inspection

    2. Press the bale trigger using a pole inserted between the bale ram and the bale deck. DANGER: DO NOT attempt to engage the bale trigger by hand. 3. The TL70LSV balewrapper should automatically follow the sequence of the manual wrap mode without the manual operation of the control panel.

  • Page 35: Section 7: Operation

    Fig.2. 9. Adjust limit switches using first bale as a gauge Fig.1 on current job’s bale size. 10. Lower rear cam axle to ground before engaging auto wrap mode. Fig.2 Section 7: Operation - Balewrapper TL70LSV...

  • Page 36: Auto Wrap Mode

    Steering The TL70LSV balewrapper is equipped with electric over hydraulic steering to keep the balewrapper headed in desired direction or to direct the wrapper around obstacles. For steering operation refer to Control Panel Functions, pg.3-1 CAUTION: Wrap on flat even surface to prevent balewrapper from drifting out of line.

  • Page 37: Ending Bale Row

    Fig.4 & Fig.2 machine. See 11. Move the bale row through the wrap chamber and onto the roller bed using the REV switch. pg.3-1 Refer to Fig.3 Fig.4 Section 7: Operation - Balewrapper TL70LSV...

  • Page 38: After Wrapping

    WARNING: Keep dispatch arm in lowered position for highway transportation. After Wrapping Inspect wrapped bale row for any holes on plastic film. Patch with tape if necessary. Label bale row with information such as wrap date, moisture percentage, foliage type, etc. Balewrapper TL70LSV - Section 7: Operation...

  • Page 39: Section 8: Transporting Balewrapper

    Remove lock pin (A) from transport lock tabs. • Pivot transport lock (B) to front lock tabs (C). • Refasten lock pin. Fig.1 • Raise rear axle until tube fully contacts transport Fig.2 lock. See Fig.2 Section 8: Transporting Balewrapper - Balewrapper TL70LSV...

  • Page 40: Disconnect Battery

    Fasten safety chain (B) securely to power unit. • Insert balewrapper’s 7-pin connector (C) into power unit’s matching receptacle. Refer to Lighting & Marking, pg.2-2 • Make sure parking brake is released before driving away. Fig.1 Balewrapper TL70LSV - Section 8: Transporting Balewrapper...

  • Page 41: Slow Moving Vehicle (Smv) Sign

    Extend the longevity of your machine store in sheltered area out of the elements and on a flat • surface. • Chock wheels and set parking brake after parking. • Refer to Maintenance Section for recommended service and maintenance • Cover balewrapper if necessary or preferred. Section 8: Transporting Balewrapper - Balewrapper TL70LSV...

  • Page 42: Section 9: Feeding

    Follow these instructions for proper plastic film disposal: Collect and dispose all plastic film in an Environmentally Friendly manner. • • Use recycling services when available. Do not burn plastic film. • Do not contaminate environment with loose plastic film. • Balewrapper TL70LSV - Section 9: Feeding...

  • Page 43: Section 10: Maintenance

    Section 10: Maintenance Grease Points Grease decals on machine signify an area to occasionally grease. Use a high quality EP grease. 10-1 Section 10: Maintenance - Balewrapper TL70LSV...

  • Page 44: Grease Timeline

    Oil filter is mounted on left side of oil tank behind engine. Replace oil filter after 60 hours of operation. See chart below for recommended oil filter replacement. FILTER CROSS REFERENCE FILTER REFERENCE Stauf SF6520 Gresen F22001 Fram P1653-A Fleetguard HF6510 Cross 1A9021 Balewrapper TL70LSV - Section 10: Maintenance 10-2...

  • Page 45: Section 11: Diagnostics

    Engine throttle has linkage to slow engine down when ram is all the way to the front. Spring on linkage will speed engine up as soon as Ram cylinder starts to extend. Section 11: Diagnostics - Balewrapper TL70LSV 11-1...

  • Page 46: Manifold Port Connections

    “B” will turn off, the Ram cylinder will stop and engine will idle down. 5. Steering is done by steering switch, right/left activating steering double solenoid valve A or B. This valve will work in either manual or automatic mode. Manifold Port Connections Balewrapper TL70LSV - Section 11: Diagnostics 11-2...

  • Page 47: Troubleshoot Plastic Film And Carriers

    CAUTION: Do not use a hammer on the aluminum stretcher rolls. 4. Plastic film sticks to bale spears and tears the plastic inside the bale. Ensure bale sit firmly on the bale deck, bale spears should deflect the hay somewhat. • Section 11: Diagnostics - Balewrapper TL70LSV 11-3...

  • Page 48: Section 12: Option - Remote Control

    LEFT - Steers left. RIGHT - Steers right. LEFT START ENGINE START* *If equipped with remote start add-on. RIGHT STOP Balewrapper TL70LSV - Section 12: Option - Remote Control 12-1...

  • Page 49: Option - Remote Control Start Add-On

    (Fins on the cap will hold the wire in place once inserted). 4. Plug 2 white existing plugs into the 2 white plugs on the provided remote start switch (A). 12-2 Section 12: Option - Remote Control - Balewrapper TL70LSV...

  • Page 50: Remote Start Add-On Operation

    3. If the machine doesn’t start you may want to engage the throttle slightly. For troubleshooting please contact your local dealer or contact us using the information provided pg.II of this manual . Balewrapper TL70LSV - Section 12: Option - Remote Control 12-3...

  • Page 51: Section 13: Option - Plastic Film Sensor

    8. Connect toggle switch red wire to control panel terminal 19. 9. Place provided film sensor decal on front face of control panel lid, centered with toggle switch. See Fig.2. Fig.2 Remove Jumper Wire Fig.3 13-1 Section 13: Option - Plastic Film Sensor - Balewrapper TL70LSV...

  • Page 52: Plastic Film Sensor Adjustment

    Make sure plastic film sensor wire is on top of plastic film after installing new plastic rolls. • Plastic film sensor wire drops when plastic film roll empties or breaks, causing wrap cycle to stop. • Balewrapper TL70LSV - Section 13: Option - Plastic Film Sensor 13-2...

  • Page 53: Section 14: Option - Wireless Plastic Film Sensor

    “1”. 7. Connect loose black PWR wire from receiver board to control panel terminal “7”. Control Panel Terminal (D) Existing White Wire Fig.2 14-1 Section 14: Option - Wireless Plastic Film Sensor - Balewrapper TL70LSV...

  • Page 54: Wireless Film Sensor Transmitter Installation

    This causes the wrap cycle to stop, ensuring no bales are pushed through the wrap chamber without plastic film coverage. Balewrapper TL70LSV - Section 14: Option - Wireless Plastic Film Sensor 14-2...

  • Page 55: Section 16: Option - Guide Roller Kit

    Guide Roller Kit Installation Refer to Parts Manual to ensure all parts are included. 1. Slide left and right guide rollers into their respective holders. 2. Bolt in place with provided hardware. Section 16: Option - Guide Roller Kit - Balewrapper TL70LSV 16-1...

  • Page 56: Section 17: Option - Night Light Kit

    See Fig.3. Night Light Kit Operation 1. Flip toggle switch on control panel to illuminate bale deck and wrap chamber. 2. Flip toggle switch again to turn off lights. Fig.3 Balewrapper TL70LSV - Section 17: Option - Night Light Kit 17-1...

  • Page 57: Section 19: Option - Laser Guidance System

    6. Reinstall cylinder pin. 19-1 Section 19: Option - Laser Guidance System - Balewrapper TL70LSV...

  • Page 58: Laser Guidance Wiring

    Laser Guidance Wiring Balewrapper TL70LSV - Section 19: Option - Laser Guidance System 19-2...

  • Page 59: Laser Guidance Adjustment

    90” to 96”. This creates a slight bend in the row but allows it to move around the root. The farmer then uses the PREV arrow button to get the row back on the desired path . 19-3 Section 19: Option - Laser Guidance System - Balewrapper TL70LSV...

  • Page 60: Main Menu: Count Bales Screen

    If you would like to reset bale count to zero simply hit the NEXT arrow button followed by the AUTO - ENT button, or the STOP - ESC button to cancel. Balewrapper TL70LSV - Section 19: Option - Laser Guidance System 19-4...

  • Page 61: Section 20: Option - Suspension Axle

    Unbolt and remove existing front axle. • Use hoist and a helper to lift the new axle into position. • Use hardware from standard front axle to bolt suspension axle in place. 20-1 Section 20: Option - Suspension Axle - Balewrapper TL70LSV...
  • Page 62 Intentionally Left Blank...

  • Page 63: Imperial Torque Value Chart

    Imperial Torque Value Chart Imperial Torque Value Chart - Balewrapper TL70LSV...

  • Page 64: Metric Torque Value Chart

    Metric Torque Value Chart Balewrapper TL70LSV - Metric Torque Value Chart VIII...
  • Page 65 Lighting & Marking . . 2-2 Main Menu: Count Bales Screen . . 19-4 Main Menu Screen . . 19-3 Manifold Port Connections . . 11-2 Manual Mode Test Run . . 6-4 Metric Torque Value Chart . .VIII Index - Balewrapper TL70LSV...
  • Page 66 Section 20: Option - Suspension Axle . 20-1 Serial Number . Slow Moving Vehicle (SMV) Sign . . 8-3 Starting a Bale Row . . 7-1 Steering . . 7-2 Steer Speed Needle Valve Adjustment . . 5-2 Balewrapper TL70LSV - Index...
  • Page 67 . 14-2 Wireless Film Sensor Receiver Board Installation . . 14-1 Wireless Film Sensor Test . . 14-2 Wireless Film Sensor Transmitter Installation . . 14-2 Wrapping Site . . 6-4 Wrapping Straw . . 1-1 Index - Balewrapper TL70LSV...
  • Page 68 CALIFORNIA Proposition 65 Warning Battery posts, terminals, and similar parts may contain lead which are known to the State of California to cause cancer and reproduc- tive harm. Wear gloves and wash hands after handling. WARNING The engine exhaust from this product contains chemi- cals known in the state of California to cause cancer, birth defects, or other reproductive harm.

Table of Contents