Enclosure Bezel For 24-Drive Models; Controller Enclosure Architecture - Internal Components Sub-Assembly (Reduced-Depth 2U24); Partial Controller Enclosure Assembly Showing Alignment For 24-Drive Enclosure Bezel - Seagate Dot Hill AssuredSAN 3000 Series Installation And Replacement Manual

I/O module
Figure 6 Controller enclosure architecture — internal components sub-assembly (reduced-depth 2U24)

Enclosure bezel for 24-drive models

As an alternative to using ear covers, SFF 24-drive enclosures support a bezel sub-assembly that attaches
to the front of the chassis (see
secured to an ear cover on each end — is pre-assembled and packed with foam into a box. The bezel
includes a removable air filter that can be serviced or replaced. Hard copy instructions for attaching or
removing the bezel, and for servicing or replacing the air filter, are provided in the shipping container of a
new enclosure configured with a bezel.
Alternatively, you can access the document online. See Dot Hill's customer resource center (CRC) web site
for additional information: http://crc.dothill.com.
Select AssuredSAN & R/Evolution Products > 3000 Series to download the R/Evolution 24-drive Enclosure
Bezel Kit Installation document.
Ball stud on chassis ear
(Typical 4 places)
Figure 7 Partial controller enclosure assembly showing alignment for 24-drive enclosure bezel
Midplane
Figure 7 on page 19). The bezel — comprised of a vented sheet metal cover
AssuredSAN 3000 Series FRU Installation and Replacement Guide
Power supply unit
Enclosure bezel sub-assembly
(Featuring removable air filter)
Disk drive
module
19