Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Automatic Programming - Philips DC177 User Manual

Tuning to radio stations

1
Press SOURCE on the set (or FM on the
remote control ) repeatedly until FM is displayed.
2
Press down on TUNING à / á (or
T on the remote control) and release the
button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
3
Repeat step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press TUNING à /
á (or S / T on the remote control) briefly
and repeatedly until you have found optimal
reception.

Programming radio stations

You can store up to a total of 40 radio stations
in the memory.

Automatic programming

Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1
Press í/ ë (or ALBUM/PRESET +/- on
the remote control) to select the preset
number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROGRAM on the remote control for
more than 2 seconds to activate programming.
➜ FM AUTO is displayed and available stations
are programmed in order of waveband
reception strength. The first preset automatically
stored will then be played.

Manual programming

1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROGRAM on the remote control to
activate programming.
➜
PROG
3
Press í/ ë (or ALBUM/PRESET +/- on
the remote control) to allocate a number from
1 to 40 to this station.
4
S /
Press PROGRAM on the remote control again
to confirm the setting.
➜
PROG
frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

●
Press í/ ë (or ALBUM/PRESET +/- on
the remote control) until the desired preset
station is displayed.

Radio Reception

flashes in the display.
disappears, the preset number and the
17