Radio Reception
Tuning to radio stations
1
Press TUNER to select the tuner source.
2
Hold
/
and then release the button.
S
T
➜
The system will start searching for a radio
station with sufficient signal strength.
3
Repeat step 2 if necessary until you find the
desired station.
●
To tune to a weak station, press
and repeatedly.
14
●
1
2
3
4
5
●
●
/
briefly
S
T
Programming radio stations
You can store up to a total of 20 radio stations
in the memory.
Automatic programming
Automatic programming will start at preset
number 1 and all your former presets will be
overridden.
Press PROG/ CLOCK for more than 3
seconds to activate programming.
➜
All available stations are programmed.
Manual programming
Tune to your desired station (refer to "Tuning to
radio stations").
Press PROG/CLOCK to activate
programming.
➜
PROG flashes in the display.
Press ALBUM/PRESET 3 4 to allocate a
number from 1 to 20 to this station.
Press PROG/CLOCK again to confirm the
setting.
➜
PROG disappears, the preset number and
the frequency of the preset station are shown.
Repeat the above four steps to store other
stations.
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
Press ALBUM/PRESET 3 / 4 until the
desired preset station is displayed.