Hunter Crestfield Installation Manual page 9

Installation – Glass Cover
Glass
3e 3e
To install the glass, first loosen the thumb
screws. Raise the glass to the light fixture.
Tighten all thumbscrews securely.
Installation – Pull Chain Pendants
3g
Screw
x3
3f 3f
Install a bulb into each of the sockets. When
necessary, replace with bulbs of same
wattage.
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make sure that glass
is properly secured.
Attach the pull chain pendants to the light and fan pull chains.
Repeat x2
The fan pull chain controls the speed: from high to off.
The light pull chain controls the light fixture: on and off.
Bulb
x3
9