Hunter Crestfield Installation Manual page 8

Installation – Light Kit
Complete
Remove the cardboard plug
guard before proceeding!
3a 3a
Connect the plugs from the fan and light fixture.
Make sure to line up the colored markings on the
connectors.
IMPORTANT
3b 3b
Push the connector and excess wire into the hole at
the top of the light fixture. The connector and excess
wiring must be pushed into the light fixture in order to
successfully mount the light fixture to the fan.
8
3c 3c
Raise the light kit to the bottom of the fan. Align the
notch on the mounting ring on the top of the light kit
with the pin in the mounting bracket on the bottom of
the fan.
HOLD HERE
3d 3d
Hold the fan body stationary and rotate the light
fixture clockwise to engage the locking pin.
Notch
Pin
Note:
Fan style may vary.