Software And Firmware Updates; Device Compatibility; Factory Reset - Philips HD9875 Manual

Software and firmware updates

Device compatibility

Factory reset

Introduction
The Airfryer HD9875 is equipped with a WiFi module, 2.4GHz 802.11 b/g/n with
a maximum output power of 92,9mW EIRP.
Updating is essential to safeguard your privacy and the proper functioning of
your Airfryer and the app.
Please always update the app to the latest version.
The Airfryer is updating the appliance firmware automatically.
Note: To enable the Airfryer to update to the latest firmware version, make sure
your Airfryer is connected to your home WiFi.
Note: Always use the latest app and firmware.
Note: Updates are made available when there are software improvements.
Note: A firmware update is started automatically when the Airfryer is in stand-by
mode. This update takes a few minutes. During this time the Airfryer cannot be
used.
For detailed information about the compatibility of the app, please refer to the
information in the app Store.
You can set your firmware back to its default settings by simultaneously pressing
the keep warm button and the rotary button for 10 seconds.
Your Airfryer is then no more connected to your home WiFi and not paired with
your smart device anymore.
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
9
English