Philips HD9875 Manual page 13

16
English
The WiFi indicator is off.
The WiFi indicator is on.
The WiFi indicator is blinking slowly.
The WiFi indicator is blinking fast.
Food table
4 Plug in the appliance.
5 Press the rotary button to turn on the appliance.
6 Follow the steps in the app to connect your Airfryer to your WiFi and pair your
Airfryer with your smart phone.
Note: Along this process in the NutriU app, you will be asked at some point to
make an extra long press (4 seconds) on the appliance to initialize the setup
process. So make sure that you stay close to your Airfryer until your Airfryer is
connected.
Important: Remote control: you can remotely control your Airfryer through
the app (e.g. send a recipe, pause cooking, etc.) only if you have checked off
the "remote consent" in the NutriU app, to be found in your NutriU profile.
Important: Single user pairing: the Airfryer can be remotely controlled by
only one user at the same time. If a second user wants to control the
Airfryer and use the NutriU app, this user has to follow the pairing process.
Once paired, the first user will be unpaired automatically.
Important: The WiFi setup process can be cancelled via the app or by
unplugging the Airfryer.
WiFi indicator
Note: You can start the paring process by long pressing the time button for 4
seconds.
Note: If you encounter any difficulties during the WiFi setup process - such as
pausing midway through and failing to complete the process, or experiencing
connectivity issues with your Wi-Fi network - you can restart the process by long
pressing the time button for 4 seconds.
Note: If you need to reset your firmware to its default settings, simply press and
hold the keep warm button and the rotary button simultaneously for 10
seconds.
The table below helps you select the basic settings for the types of food you
want to prepare.
WiFi is disabled.
WiFi is enabled and connected to the router.
WiFi connection is ongoing. The device is in the
pairing process or connecting to the router.
WiFi connection error.