Install Microinverter - Zendure Smart PV Hub 1200 Controller User Manual

5.3.4 Install Smart PV Hub
Tips:
• Please install the Smart PV Hub in a place out of direct sunlight.
• The length of our solar cables are 3 meter, so before confirming the
location of the Smart PV Hub's installation, please measure the distance
from MC4 connector of solar panel to MC4 connector of Smart PV Hub.
1
3
1
2
4
Mark Location, Find a wall you plan to install, one person fixes the
1
Smart PV Hub on the wall with his hands, and the other person marks
the positions of the four screw holes of the Smart PV Hub with a
marker.
Drilling,drill four diameter 8mm mounting holes at the four marked
2
positions.
Installing screws,first Respectively Install the yellow plastic expansion
3
screw tube into the 4 holes which step 3 drilling,then screw 2/3 of the
& screws into the yellow plastic expansion tube.
1 2
Hang Smart PV Hub, please hang the Smart PV Hub on exposed part of
4
the screw
1
One person fixes the Smart PV Hub with both hands, and the other one
5
screws the rest of
Install another two screws, screw 3 and 4 into the yellow plastic
6
expansion tube and completely into the wall.In this way, you have
completed the installation of Smart PV Hub.

5.3.5 Install Microinverter

Tips: The method of assembly is subject to the instructions of the
Microinverter.
• In order to less connections, it is recommended that Microinverter is
installed between Smart PV Hub and home socket, close to the PV Hub.
• Ensure a distance of at least 50mm between the Smart PV Hub and the
Microinverter to dissipate heat.
2
1
4
3
3
& .
2
& screw into the wall completely.
1 2
2
4
2
1
4
3
5
EN
2
2
1
1
1
1 4
4
3
3
3
1
4
6
2
2
11