Page 1
Click the button to watch the assembly video KING PADDINGTON BED BASE...
Page 2
Attach side panel bracket to headboard Click the button to watch the bracket and push down. assembly video Repeat for the other side.
Page 3
Attach side panels to the foot rail. Click the button to watch the assembly video Screw legs (x4) in middle centre supports, then attach centre supports to headboard and footrail frame. Adjust feet so it almost touches the ground...
Page 4
Lower the slat panel onto the bed base. Click the button to watch the To secure the slat press down on the velcro assembly video firmly until you hear a click. Repeat with all slat panels. Align holes of headboard with holes on headboard bracket. NOTE - Insert 2x dowels into the centre holes of the headboard for better alignment...
Page 5
Secure headboard by using the Click the button gumnuts provided. to watch the assembly video Enjoy!
Page 6
Click the button to watch the assembly video don’t forget to recycle.
Need help?
Do you have a question about the PADDINGTON BED BASE and is the answer not in the manual?
Questions and answers