Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ozone OZO2
Summary of Contents for Ozone OZO2
-
Page 2: Table Of Contents
CONTENTS Thank You Warning Your OZO² Anatomy of the F*Lite² Preparation Connection to the wing Reversing the harness Use and Maintenance Ozone Quality Guarantee Technical Specifications EN v1.0 May 2023... -
Page 3: Thank You
THANK YOU Thank you for choosing Ozone. As a team of free flying enthusiasts, competitors and adventurers, Ozone’s mission is to build paragliding equipment of the highest quality. We are constantly working together to develop cutting edge designs with class leading performance and maximum security. -
Page 4: Warning
Flying an Ozone harness is undertaken with the full knowledge that paragliding involves such risks • As the owner of an Ozone harness you take exclusive responsibility for all risks associated with its use. Inappropriate use and or abuse of your equipment will increase these risks •... -
Page 5: Your Ozo²
The 30 Liter volume fits all sizes of the Ultralite and XXLite wings, and all similar wings in the class. In accordance with our mission to increase the sustainability of all Ozone products, the OZO² is made with certified Bluesign & OEKO-TEX ripstop fabric. -
Page 6: Anatomy Of The F*Lite²
ANATOMY OF THE OZO² Shoulder straps Shoulder strap retainer Revesable rucksack / rear pocket Chest strap Main Hang points Leg straps Speed system... -
Page 7: Preparation
PREPARATION Initial Set Up Before you first flight, we recommend you to set up the harness in the comfort of your own home so that you become familiar with its functions and characteristics. You should hang the harness from a suitably strong suspension point to ensure it is been set up correctly and suitable for a comfortable flight. - Page 8 Method 2: Stepping through the leg/chest straps. If using X Lite Connects you may find that leaving the harness attached to your wing is more convenient. In which case, one at a time, step through the chest and leg straps before pulling the shoulder straps into place.
- Page 9 DO NOT use X-Lite connects, they have not been designed or tested to cope with the potentially high shock loads associated with a parachute deployment. The Ozone Ultralite rescue container is a perfect lightweight option. WARNING: X-Lite connects are only suitable for connecting paraglider risers to the harness. They MUST NOT be used to attach reserve parachutes.
-
Page 10: Connection To The Wing
CONNECTION TO THE WING The harness should be attached to the risers using a suitable carabiner. For the lightest option we recommend the X-Lite connects. Whatever the type of connection used, ensure that both the leg strap and lumbar support loops pass through the connector. Each side is colour coded. IMPORTANT: There are no other suitable attachment points to attach the risers to the harness. -
Page 11: Reversing The Harness
REVERSING THE HARNESS To reverse the harness into the backpack, it is not necessary to first disconnect the wing from the carabiners. Ensure all the buckles, carabiners, risers and structural straps are placed on the inside of the harness structure. It is recommended to place the folded wing within the harness. -
Page 12: Use And Maintenance
USE AND MAINTENANCE PRe-FLIgHT CHeCkS Before take off it is important to carry out a thorough pre-flight check: • Visual check of structural webbing looking for any obvious damage or twists • Visual check of the X-Lite connects/carabiners for any signs of wear or fatigue •... - Page 13 InSPeCTIon For safety, routine inspection of all of your equipment is vitally important. Ozone recommends a service interval of 6 months in addition to the usual thorough pre-flight checks. For inspection, visually check the stitching, webbing and all structurally important areas. Pay particular attention to the webbing around the hang point area and the carbon bars as this is where abrasion/damage is most likely.
-
Page 14: Ozone Quality Guarantee
OZONE QUALITY GUARANTEE At Ozone we take the quality of our products very seriously, all our equipment is made to the highest standards in our own manufacturing facility. Every product manufactured goes through a stringent series of quality control procedures and all the components used to build your harness are traceable. We always welcome customer feedback and are committed to customer service. -
Page 15: Technical Specifications
TECHNICAL SPECIFICATIONS Weight (g) Recommended pilot height (cm) 150 - 170 160 -185 180 - 200 mATeRIALS Harness Outer fabric Nylon 70D Main structural webbing Technisangle 7 CeRTIFICATIon The OZO² is certified EN 1651:2018+A1 with a maximum load of 120kgs. SIZIng CHART... - Page 17 INSPIRED DRIVEN BY NATURE, BY THE ELEMENTS Ozone Gliders Ltd 16 Barnes Green Livingston Scotland UNITED KINGDOM...
Need help?
Do you have a question about the OZO2 and is the answer not in the manual?
Questions and answers