Watts SentryPlus Alert LF919 Series Installation Instructions Manual
Bms flood sensor retrofit connection kit
Hide thumbs
Also See for SentryPlus Alert LF919 Series:
- Installation, maintenance & repair (4 pages) ,
- Installation, maintenance & repair (8 pages) ,
- Manual (18 pages)
Advertisement
Available languages
Available languages
Quick Links
Installation Instructions
BMS Flood Sensor
Retrofit Connection Kit
Series LF919
⁄
" – 2"
1
2
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use infor-
mation can result in death, serious personal injury,
property damage, or damage to the equipment.
Keep this Manual for future reference.
You are required to consult the local building and plumbing codes prior
to installation. If the information in this manual is not consistent with
local building or plumbing codes, the local codes should be followed.
Inquire with governing authorities for additional local requirements.
NOTICE
Use of the SentryPlus Alert
the need to comply with all required instructions, codes,
and regulations related to the installation, operation, and
maintenance of the backflow preventer to which it is
attached, including the need to provide proper drainage in
the event of a discharge.
Watts is not responsible for the failure of alerts due to
connectivity or power issues.
Monitor relief valve discharge with smart and connected sensor
technology to detect flooding and transmit notification. The
BMS Flood Sensor Retrofit Connection Kit upgrades existing
installations by integrating and activating the sensor to enable
functions for flood detection. When excessive relief valve
discharge occurs, the sensor energizes a relay signaling flood
detection and triggers real-time notification of potential flood
conditions through the building management system.
technology does not replace
®
IS-RFK-FS-919-BMS
Advertisement
Related Manuals for Watts SentryPlus Alert LF919 Series
Summary of Contents for Watts SentryPlus Alert LF919 Series
- Page 1 Watts is not responsible for the failure of alerts due to connectivity or power issues. Monitor relief valve discharge with smart and connected sensor technology to detect flooding and transmit notification.
-
Page 2: Kit Components
Kit Components The retrofit connection kit for installing and activating the flood sensor includes the items shown below. If any item is missing, speak with your account representative about ordering code 88009423. A. Activation module with 8' conductor cable and ground wire B. - Page 3 Install the Flood Sensor and Activation Module Install the flood sensor with the interface pointing in the same direction as the valve flow arrow. The activation module receives a signal from the sensor when a discharge is detected. If the discharge meets the conditions of a qualifying event, the normally open contact is closed to provide a signal to the BMS input terminal.
- Page 4 Limited Warranty: Watts Regulator Co. (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.
- Page 5 Watts n’est pas responsable de la défaillance des alertes en raison de problèmes de connectivité ou d’alimentation. Surveillez l’évacuation de la soupape de décharge avec la technologie de capteur intelligente et raccordée...
- Page 6 Composants de la trousse La trousse de raccordement de modernisation pour l’installation et l’activation du capteur d’inondation comprend les articles indiqués ci-dessous. S’il manque un article, demandez à votre représentant à propos du code de commande 88009423. A. Module d’activation avec câble de 8 pieds (2,4 mètres) B.
- Page 7 Installation du capteur d’inondation et du module d’activation Installez le capteur d’inondation avec l’interface pointant dans la même direction que la flèche de débit de la vanne. Le module d’activation reçoit un signal du capteur lorsqu’une évacuation est détectée. Si l’évacuation répond aux conditions d’un événement admissible, le contact normalement ouvert est fermé...
- Page 8 Garantie limitée : Watts Regulator Co. (la « Société ») garantit que chacun de ses produits est exempt de défaut de matériau et de fabrication dans des conditions normales d’utilisation, pour une période d’un an à compter de la date d’expédition d’origine. Si une telle défaillance devait se produire au cours de la période sous garantie, la Société...
- Page 9 Watts no asume responsabilidad por fallas de las alertas debido a problemas de conectividad o de alimentación. Monitoree la descarga de la válvula de alivio con tecnología de sensor inteligente y conectada para detectar...
-
Page 10: Componentes Del Kit
Componentes del kit El kit de conexión de readaptación para instalar y activar el sensor de inundación incluye los elementos que se muestran a continuación. Si falta algún artículo, hable con su representante de cuenta sobre el código de pedido 88009423. A. - Page 11 Instalación del sensor de inundación y del módulo de activación Instale el sensor de inundación con la interfaz que apunte en la misma dirección que la flecha de flujo de la válvula. El módulo de activación recibe una señal del sensor al detectar una descarga. Si la descarga cumple las condiciones de un evento calificado, el contacto normalmente abierto se cierra para proporcionar una señal a la terminal de entrada del BMS.
- Page 12 Garantía limitada: Watts Regulator Co. (la “Compañía”) garantiza que cada producto estará libre de defectos en el material y mano de obra cuando se usen de forma normal durante un periodo de un año a partir de la fecha de envío original. En caso de que tales defectos se presenten dentro del período de garantía, la Compañía, a su discreción, remplazará...