Snmp Setup - Planet Networking & Communication ICS-2100T User Manual

4.6 SNMP Setup

Use the Port Menu to display or configure the Industrial Industrial Serial Server's ports. This section includes the page that
displays current port configurations. Ports can also be configured here. The Port Configuration screen in
The page includes the following fields:
Object
SNMP Active
•
• Community
• Contact
• Location
• Trap Server
Events
Object
Cold Start Trap
•
• Warm Start Trap
• Authentication Failure
Trap
User's Manual of ICS-2x00T Serial Device Server Series
Figure 4-6-1: SNMP Setup page Screenshot
Description
Indicates the SNMP mode operation. Possible modes are:
Disable:
Disable SNMP mode operation.

Enable:
Enable SNMP mode operation.

Indicates the security name to map the community to the SNMP Groups
configuration.
The textual identification of the contact person for this managed node, together
with information on how to contact this person.
The physical location of this node (e.g., telephone closet, 3rd floor).
Indicates the SNMP trap destination address. It allows a valid IP address or
domain name.
Description
This event is triggered when the power is interrupted and restarted.
This event occurs when the device is reset but does not turn off the power.
This event occurs when an incorrect or unauthorized password are entered.
68
Figure 4-6-1 appears.