Wall Mount Plate Mounting - Planet Networking & Communication ICS-2100T User Manual

User's Manual of ICS-2x00T Serial Device Server Series

2.2.3 Wall Mount Plate Mounting

To install the Industrial Serial Server on the wall, please follow the instructions below.
Follow all the DIN-rail installation steps as shown in the example.
Step 1: Remove the DIN-rail bracket from the Industrial Serial Server. Use the screwdriver to loosen the screws to remove the
DIN-rail.bracket.
Step 2: Place the wall-mount plate on the rear panel of the Industrial Serial Server.
Step 3: Use the screwdriver to screw the wall-mount plate on the Industrial Serial Server.
Step 4: Use the hook holes at the corners of the wall mount plate to hang the Industrial Serial Server on the wall.
Step 5: To remove the wall-mount plate, reverse the steps above.
25