Additional Fittings - Samson 44-0 B Mounting And Operating Instructions

3.1 Additional fittings

Î See Fig. 3-2
Strainers
We recommend installing a SAMSON
strainer (3) upstream of the valve. It prevents
solid particles in the process medium from
damaging the regulator.
Î Do not use the strainer to permanently
filter the process medium.
Î Select a strainer (mesh size) suitable for
the process medium.
1
p
1
1 Shut-off valve
2 Upstream pressure gauge
3 Strainer
4 Downstream pressure gauge
Fig. 3-2: Steam control with Type 44-0 B (installation example)
EB 2626-1 EN
2
3
Type 44-0 B Steam Pressure
Reducing Valve
Design and principle of operation
Note
Any impurities carried along by the process
medium may impair the proper functioning
of the regulator. We recommend installing a
strainer (e.g. SAMSON Type 1 NI) upstream
of the pressure reducing valve (u EB 1010).
Pressure gauges
Install a pressure gauge (2 and 4) both up-
stream and downstream of the regulator to
monitor the pressures prevailing in the plant.
1
4
p
2
5 Safety valve
6 Vent plug
7 Steam traps
5
6
7
3-3