Ordering Spare Parts And Operating Supplies - Samson 44-0 B Mounting And Operating Instructions

Servicing
Assembly
1. Replace the body gasket (1.1) with a
new one.
2. Place the spring housing with spring (7)
and operating bellows (5) onto the valve
body.
3. Screw in the screws (10). Observe the
specified tightening torques (see 'Tighten-
ing torques' in Annex).
Note
Change the nameplate and configuration ID
after changing the set point range.
9.4 Ordering spare parts and
operating supplies
Contact your nearest SAMSON subsidiary
or SAMSON's After-sales Service for infor-
mation on spare parts, lubricants and tools.
Spare parts
See Annex for details on spare parts.
Lubricants
Contact SAMSON's After-sales Service for
more information on lubricants.
Tools
Contact SAMSON's After-sales Service for
more information on tools.
9-6 EB 2626-1 EN