Impedance Selector - 3rd Power DIRTY SINK 6VEL User Manual

Back Panel (Section Two):
FAN

Impedance Selector (20)

The 16-OHM SPEAKER position is provided for connecting your amplifier to standard 16 OHM
speaker cabinet. The 8-OHM SPEAKER position is provided for connecting your amplifier to a single
8-OHM, or two 16-OHM speaker cabinets. The 4-OHM SPEAKER position is provided for connecting
your amplifier to a single 4-OHM, or two 8-OHM speaker cabinets.
Speaker Jacks (21)
The SPEAKER OUTPUTS are wired in parallel.
SAFETY NOTES:
• Never operate your amplifier without a connected speaker cabinet. This will damage your tubes
or transformers - or both.
• Always operate your amplifier with the proper impedance output that matches your speaker cab-
inet(s).
• In all cases, always use a good quality heavy gauge speaker cable (not a shielded instrument ca-
ble) to connect your DIRTY SINK 6VEL to the speaker cabinet(s).
Hybrid-MASTER™ Control (22)
The proprietary HYBRID-MASTER control allows you to set the overall volume level of the amplifier
independent of the volume and tone settings established on the front panel. The MAIN control is
always active and sets the minimum volume of the amplifier (rhythm volume).
HM Bypass Control (23)
Create custom volume level presets perfect for setting up a rhythm and lead volume scene changes
for recalling them live via foot-switch.
OHM SELECTOR
16Ω 4Ω
8Ω
20 21
(See next page for sample settings.)
9
22 23