Sample Settings - 3rd Power DIRTY SINK 6VEL User Manual

Back Panel (Section Four):
OHM SELECTOR
16Ω
4Ω
8Ω
Sample Rehearsal Setting Sample Gig Setting

Sample Settings:

When in rehearsals (or on a live TV set), adjust the HYBRID-MASTER to 8 o' c lock (this will be your
rhythm volume). Adjust HM BYPASS to 8 o' c lock (this will be your lead volume). When you press the
HM BYPASS switch located on the 4 Button Pro foot switch, the volume will toggle between rhythm
level and lead level. Fine tune to your application.
When performing live on stage, adjust the HYBRID-MASTER to 10-11 o' c lock (this will be your
rhythm volume). Adjust HM BYPASS to 4-5 o' c lock (this will be your lead volume). When you press the
HM BYPASS switch located on the 4 Button Pro foot switch, the volume will toggle between rhythm
level and lead level. Fine tune to your application.
25
4 Button Pro Foot Switch
The 4 Button Pro ships with the Dirty SINK 6VEL. It gives you total command over Active and Mute
mode, Preamp Gain, FX Loop Bypass and Solo Boost with a single button assigned to each feature.
FTSW Bus Assign Switch (25):
With this feature, it is possible to engage additional preamp gain, turn on the FX Loop and cue your
own lead solo volume levels all on a single button. In the up position, each mini toggle switch will
send the selected feature to the FTSW Bus foot switch (far right button). In the down position, each
feature will remain controllable by their allocated foot switch button.
10