Treble Control - 3rd Power DIRTY SINK 6VEL User Manual

Front Panel (Section One):
1 2 3 4 5 6
Preparing to Operate your Dirty SINK 6VEL™
Make certain that all connections are made prior to operating your amplifier including power cable,
speaker connection, instrument cable and instrument connection. Make certain that all tubes are in-
stalled.
Input Jack (1)
The INPUT jack is where you connect instrument level signals.
Gain Control (2)
The GAIN control allows you to adjust the signal gain level as well as the temperament and overall
character of your instrument's sound. Clean tones are at the lower end of the control dial. Preamp
saturation, distortion and compression increase as you go higher on the dial.
Volume Control (3)
The VOLUME control allows you to adjust the signal level that feeds the FX Loop circuitry. When you
have the GAIN control at lower settings, you will tend to run this control higher up (1 to 2 o' c lock).
When you have the GAIN control at higher settings, you will tend to run this control in the mid to
lower setting range (10 to 11 o' c lock).

Treble Control (4)

The TREBLE control allows you to adjust the character of the higher frequency range.
Middle Control (5)
The MIDDLE control allows you to adjust the emphasis of the mid-range frequencies.
Bass Control (6)
The BASS control allows you to adjust the depth of your lower frequencies.
5