Disassembly Of Slip Mat Ass'y And Turntable Ass'y; Disassembly Of Pitch Knob And Power Sw Knob; Disassembly Of Insulators - Technics SL-1200MK7PP Service Manual

6.4. Disassembly of Slip Mat Ass'y
and Turntable Ass'y
Step 1 Remove Slip Mat Ass'y and Turntable Ass'y as arrow
shown.
Note:
• The Tone Arm Unit should be supported by Arm Rest.
• Take care not to stick the dust or iron powder to the
magnet attached to back inner side of turntable.
6.5. Disassembly of Pitch Knob
and Power SW Knob
Step 1 Remove Pitch Knob as arrow shown.
Step 2 Remove Power SW Knob as arrow shown.
Note: When replacing the Pitch Knob, insert the Pitch
Knob at the edge of the Pitch Control Volume. (Inserting it
at the center will increase the load due to the distance from
the fixing screw of the Pitch Control Volume).
6.6.

Disassembly of Insulators

• Refer to "Disassembly of Slip Mat Ass'y and Turntable
Ass'y".
Step 1 Place the Dust Cover Unit on Cloth.
Step 2 Flip Cabinet Ass'y and put it on Cushion to prevent
scratch.
Step 3 Turn the 4 Insulators in the direction of arrow and
remove them.
19