Disassembly Of Sw P.c.b; Disassembly Of Panel P.c.b; Disassembly Of Strobe P.c.b - Technics SL-1200MK7PP Service Manual

Note: When assembing the Operation Ass'y, insert as
arrow shown

6.16. Disassembly of SW P.C.B.

• Refer to "Disassembly of Slip Mat Ass'y and Turntable
Ass'y".
• Refer to "Disassembly of Insulators".
• Refer to "Disassembly of Bottom Chassis Ass'y".
• Refer to "Disassembly of Operation Ass'y".
Step 1 Remove screw.
Step 2 Detach 2P Wire at connector (P700) on SW P.C.B..
Step 3 Remove SW P.C.B..

6.17. Disassembly of Panel P.C.B.

• Refer to "Disassembly of Slip Mat Ass'y and Turntable
Ass'y".
• Refer to "Disassembly of Insulators".
• Refer to "Disassembly of Bottom Chassis Ass'y".
• Refer to "Disassembly of Operation Ass'y".
Step 1 Remove 2 screws.
Step 2 Slightly lift up the Panel P.C.B..
Step 3 Detach 2P Wire at connector (P101) on Panel P.C.B..
Step 4 Detach 5P Wire at connector (P102) on Panel P.C.B..
Step 5 Remove Panel P.C.B..

6.18. Disassembly of Strobe P.C.B.

• Refer to "Disassembly of Slip Mat Ass'y and Turntable
Ass'y".
• Refer to "Disassembly of Insulators".
• Refer to "Disassembly of Bottom Chassis Ass'y".
• Refer to "Disassembly of Operation Ass'y".
Step 1 Release catch.
Step 2 Detach 5P Wire at connector (P300) on Strobe P.C.B..
Step 3 Remove Strobe P.C.B. as arrow shown.
26