Disassembly Of Smps P.c.b; Disassembly Of Operation Ass'y - Technics SL-1200MK7PP Service Manual

Step 4 Remove 3 screws.
Step 5 Detach 2P Wire at connector (P401) on Stylus SW
P.C.B..
Step 6 Remove Stylus SW P.C.B..

6.14. Disassembly of SMPS P.C.B.

• Refer to "Disassembly of Slip Mat Ass'y and Turntable
Ass'y".
• Refer to "Disassembly of Insulators".
• Refer to "Disassembly of Bottom Chassis Ass'y".
Step 1 Remove 2 screws.
Step 2 Remove 2 screws.
Step 3 Remove AC Holder.
Step 4 Remove 7 screws.
Step 5 Detach 5P Wire at connector (P1730) on SMPS P.C.B..
Step 6 Remove SMPS P.C.B..
6.15. Disassembly
Ass'y
• Refer to "Disassembly of Slip Mat Ass'y and Turntable
Ass'y".
• Refer to "Disassembly of Pitch Knob and Power SW
Knob" (Step 2).
• Refer to "Disassembly of Insulators".
• Refer to "Disassembly of Bottom Chassis Ass'y".
Step 1 Remove 4 screws.
Step 2 Release Wire from Clamper.
Step 3 Slightly remove Operation Ass'y from Top Panel as
arrow shown.
Step 4 Detach 11P Wire at connector (P100) on Panel P.C.B..
Step 5 Remove Operation Ass'y.
25
of Operation