Advertisement
Head Shell
Cartridge
I
i
1
1
i
=
52mm (2-1/16") —>t
®
@
Fig. 4
Add. 4
Lift Adjustment Serew
Cueing Lever
Fig. 6
Add. 6
fn Height Adjustment Screw
Fig. 7
Add. 7
@ADAPTOR
FOR 7 INCH 45 R.P.M. RECORD
(See Fig.1- @ )
When playing 45 r.p.m. records, use this accessory.
@OIL HOLE (See Fig.1- ©)
@SPECIAL OIL (See Fig.1- ® )
The bearing parts of this set are designed with an ultra-precise finish
to prevent the generation of "Wow and Flutter"
A special oil has been used to maintain the high-performance efficiency
of this set by forming a uniform film of oil over the parts. For this
reason, use only the oil included in this set for its lubrication.
Even if there is oil leakage around the oi! hole or the rotor, caused
during transportation, it will not effect the performance.
Before use, apply about 2 drops of oil into the oil hole.
To lubricate, open the tip of the vessel with a needle, After lubricating,
cover the vessel with the cap to prevent the leakage of oil,
Never use any other type of oil. To lubricate, remove the turntable
platter and apply about 2 drops of oil into the oil hole.
It is sufficient to lubricate the set once after approximately 2,000
hours of use.
Two thousand hours are equivalent to 5-1/2 years, if the set is used
one hour a day, or to 8 months if used 8 hours a day.
This period is much longer than has been necessary on previous, con-
ventional motors,
Do not apply too much oil, nor more often than
necessary.
@ TURNTABLE MAT (See
Fig.
o)
@TURNTABLE PLATTER (See Fig.1- @ )
@PLAYER CASE (See Fig.1- ® )
@BOTTOM COVER (See Fig.1- © )
@®AUDIO-INSULATED
LEGS (See Fig.1- ® )
The audio-insulated legs are designed to absorb vibration entirely by
Using special materials inside them, Adjust the height and level of the
player system by turning legs.
@DUST COVER (See Fig.1- ® Fig.3)
Reise the dust cover upward and place it securely in the hinges.
CAUTION:
We recommend that you take off the dust cover, if the dust cover
becomes the cause of "Howling" from the vibration of speakers
Do not wipe the dust cover with any cleaner containing alcohol,
enzine or thinner. Use the polishing cloth included in the carton.
@HINGES (See Fig.1- ©
® OUTPUT TERMINALS (See Fig.1- © )
Connect the pickup cords provided in this set to the same channel
of the amplifier.
R (REO)
——>
EEE channel
L (WHITE)
——>
[EB Channel
E (U shop) —>
EES
@ AC CORD
(See Fig.1- © )
Fig. 5
Add. 5
Advertisement
