Advertisement
Storing Voice Tags
From the address book entry information page, press
the Add Voice tag screen button. The system will
respond "Name Please?".
Navigation Help
Navigation Help: This command instructs the system
to assist with navigation commands.
Display Commands
Use the following display commands to set the
display mode.
Display [set] day [mode]: Use this command to set
the display to daytime mode.
Display [set] night [mode]: Use this command to set
the display to night mode.
Display [set] auto [mode]: Use this command to set
the display to automatic mode. The system will
change between day and night mode automatically.
System help: This command instructs the system to
assist with display commands.
4-4
Radio Commands
The following are radio commands you can access by
clearly stating the commands exactly as they are written.
The commands are only available when you are in
one of the following audio modes, AM, FM, or XM™
(if equipped).
Radio: This command instructs the system to turn the
audio system on.
Radio [band] [select] AM, radio [band] [select] FM,
radio [band] [select] XM, radio [band] [select]
satellite: These commands instruct the system to go to
either the AM, FM, or XM (if equipped).
Radio [select] (frequency) AM, radio [select]
(frequency) FM: These commands instruct the system
to go to a specific frequency on either AM or FM.
Radio [select] (channel) XM, radio [select] (channel)
satellite: These commands instruct the system to
go to a specific channel on the XM™ band (if equipped).
The channel must be a valid channel or the system
will keep the radio at the current station setting.
The system will pause while searching for the channel.
Radio help: This command instructs the system to
assist with radio commands.
Advertisement
