Advertisement
Setting the Time
To set the time, do the following:
1. Press the clock touch screen button located in the
upper right corner of the screen.
2. Press the Set screen button.
3. Press the Hours and Minutes – (minus) and + (plus)
signs to decrease and to increase the time.
See "Setting the Time" under Configure Menu on
page 2-32 for more information.
Setting the Search Area, Entering an
Address and Point of Interest, and
Storing Preset Destinations
Before entering an Address, Point of Interest, Home, or
Preset Destination, select the appropriate region that
contains the final destination. Your vehicle must
be in PARK (P) to perform this operation.
1-8
Setting the Search Area
To set the search area, do the following:
1. If the radio is already on with a map disc inserted,
skip to Step 5.
2. Press the
O
(power) knob to turn the system on.
3. Insert the DVD map disc. See "Installing the Map
DVD" under Maps on page 2-4 for more information.
4. A caution may appear. Touch the OK screen button
to proceed.
5. Press the DEST hard key.
6. Press the Change Search Area screen button.
7. Select the appropriate region numbered screen
button that contains your final destination.
The system will return to the Destination Entry menu.
See Destination on page 2-14 for more information.
Advertisement
