Advertisement
Using Your Stored Preset Destinations
These destinations are available for selection while
driving.
1. If the radio is already on with a map disc inserted,
skip to Step 5.
2. Press the
O
(power) knob to turn the system on.
3. Insert the DVD map disc. See "Installing the
Map DVD" under Maps on page 2-4 for more
information.
4. A caution may appear. Touch the OK screen button
to proceed.
5. Press the DEST hard key.
6. Select one of the available preset destination
screen buttons. A map screen, with the destination
marked, will appear.
7. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
8. Select the Start Guidance screen button. You are
now ready to start your route.
See "Preset Destination" under Destination on page 2-14
for more information.
1-12
Canceling Guidance
Guidance will be canceled once you arrive at your final
destination. To cancel guidance prior to arrival at the
final destination, do the following:
1. Press the DEST hard key.
2. Press the Cancel Guidance screen button.
Guidance Volume
To adjust the volume of voice guidance prompts, do the
following:
1. Press the MENU hard key to enter the menu
options, then press the MENU key repeatedly
until Nav is selected or touch the Nav screen button.
>
2. Press the
Voice Prompt screen button.
3. Press the + (plus) or – (minus) screen buttons to
increase or to decrease the volume of the voice
prompts.
See "Voice Prompt" under Configure Menu on
page 2-32 for more information.
Cleaning the Video Screen
When cleaning the video screen, use only a soft clean
cotton cloth dampened with clean water.
Advertisement
