Advertisement
Map Coordinates
The coordinates destination entry method allows you to
select a destination by entering latitude and longitude
coordinates.
Map Coordinates: Touch this screen button to access
the Coordinates screen.
To use the coordinates destination entry method,
do the following:
1. Press the DEST hard key.
2. Select the Pick from Map screen button.
3. Select the Map Coordinates screen button.
4. Touch N (north) or S (south) next to Lat. (latitude)
to enter the direction of the latitude coordinate.
Enter the numeric portion of the latitude coordinate.
5. Touch E (east) or W (west) next to Long. (longitude)
to enter the direction of the longitude coordinate.
Enter the numeric portion of the longitude
coordinate.
6. Once both coordinates are entered, select the OK
screen button. The map screen, with the destination
marked, will display.
7. Select the route preference (Fastest, Shortest, or
Other). The system will calculate and highlight
the route.
8. Select the Start Guidance screen button. You are
now ready to start your route.
See "Getting Started on Your Route" later in this
section for more information.
2-25
Advertisement
