Table of Contents
Advertisement
Using your Stereo Bluetooth Speaker
Let's get started
5. When pairing is complete the LED will change to flash slowly.
6. Now that you have paired your device with the Stereo Bluetooth speaker, it will
connect to it when it is within range, which is about 10 metres or less (33 feet or less),
line of sight.
7. Your device will remain paired with the Stereo Bluetooth speaker unless you decide to
disconnect or 'unpair' it.
Note: You can press and hold the play/pause button for approximately 3 seconds to
unpair your current device and search for new devices.
Adjusting the volume
Volume-
•
Press and release to decrease the volume in steps.
•
Press and hold to progressively decrease the volume.
Volume+
•
Press and release to increase the volume in steps.
•
Press and hold to progressively increase the volume.
Note: You will hear an audible alert when the minimum or maximum volume level has
been reached.
Listening to Music/Audio using Bluetooth
In Bluetooth mode:
1. Select and start the music or audio that you wish to listen to on your paired Bluetooth
device, it will now be heard through the Stereo Bluetooth speaker. Adjust the volume
on the connected device and/or your Stereo Bluetooth Speaker.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Using your Stereo Bluetooth Speaker
17
Advertisement
Table of Contents
