Power On; Standby Mode; Connect To A Bluetooth Device - Bush WO323 Instruction Manual

Using your Stereo Bluetooth Speaker
Let's get started

Power on

Press the Power switch on the back of the product to on. Your Stereo Bluetooth speaker
will switch on and the bluetooth LED behind the front speaker mesh, will flash quickly
whilst your product searches for Bluetooth devices.

Standby mode

If the Stereo Bluetooth speaker does not receive an audio signal for approximately 15
minutes it will go to Standby mode and the bluetooth LED will flash slowly. Press and
hold the Play/Pause button for 5 seconds to turn the product back on again. Alternatively
you can switch the product off and on again using the switch on the back of the product.
Power off
Press the Power switch on the back of the product to power off.completely

Connect to a Bluetooth device

1. The LED behind the front speaker mesh will flash quickly whilst your product searches
for Bluetooth devices.
2. On the device that you would like to connect to your Stereo Bluetooth speaker
via Bluetooth (e.g. iPhone/iPad/Android/other phone/Tablet/Computer), turn on
Bluetooth connectivity and ensure that it is 'discoverable' .
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to 'Add new device' , if necessary.
Note: Some products will automatically search for a new device and so the 'Add new
device' option is not available.
4. When found, your Stereo Bluetooth speaker will be displayed as 'BUSH Speaker' .
Select the device name to begin pairing.
Note: If your device requests a password, please enter '0000' to complete the device
pairing.
16 Using your Stereo Bluetooth Speaker