Page 2
You’ll soon be enjoying your new Bluetooth Speaker with Wi-Fi. It all begins here, with your instructions. Don’t worry, there’s nothing too technical coming up. Just simple, step-by-step guidance to get you up and running quickly. Sound good? Then let’s get started. Help and Guidance We’re here to help you get the most from your Bluetooth Speaker with Wi-Fi.
Page 3
Aux in mode Other information Technical specification Product support Troubleshooting Help and assistance Disposal Your Bush Guarantee section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Safety information Important - Please read these instructions fully before installing or operating General safety information Keep the product and all its parts out of reach of small children. This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Safety information Important - Please read these instructions fully before installing or operating Positioning the Bluetooth speaker with Wi-Fi It is important that you consider carefully in advance where your Bluetooth Speaker with Wi-Fi will be situated and make sure that it is: •...
Getting to know your Bluetooth Speaker with Wi-Fi...
Page 10
Getting to know your Bluetooth Speaker with Wi-Fi You’ll be up and running in no time Ready? Let’s begin... Please read these instructions carefully. They contain important information which will help you get the best from your product and ensure safe and correct installation and operation.
Page 11
Getting to know your Bluetooth Speaker with Wi-Fi You’ll be up and running in no time Fig 2. 6. Reset • Short press: Change the mode (Wi-Fi/Aux in/Bluetooth). • Long press to reset • Long press: Power off • Short press: Disconnect WiFi or Bluetooth 8.
Getting to know your Bluetooth Speaker with Wi-Fi You’ll be up and running in no time Power on • Short press the Power/Mode button. Power off • Long press the Power/Mode button LED ring coloured status indication Initial product power on and initialisation: Red continuously on for 30 seconds.
Getting to know your Bluetooth Speaker with Wi-Fi You’ll be up and running in no time Change the mode Your Bluetooth Speaker with Wi-Fi has 3 modes, Internet, Aux in and Bluetooth, which it indicates using a coloured LED ring on the top of the product. 1.
Using your Bluetooth Speaker with Wi-Fi Let’s get started Power connection 1. Connect the mains power lead into the DC-in 5V socket on the back of your speaker. 2. Plug the power adaptor into the mains power wall socket and switch on. The speaker will switch on and the LED ring on the top of the speaker will be continuously red.
Page 17
Using your Bluetooth Speaker with Wi-Fi Let’s get started 4. Select and connect to the AirMusic Wi-Fi hotspot. 5. Open the AirMusic Control App. 6. Select AirMusic. 7. Your device will now search for available networks to connect to. Select your home network name or SSID from the list shown.
Page 18
Using your Bluetooth Speaker with Wi-Fi Let’s get started 9. The LED ring on the top of your speaker will flash green whilst it attempts to connect via your home network to the internet. After a successful internet connection the LED ring will change to be green continuously on and the AirMusic App will display the following selection screen.
Using your Bluetooth Speaker with Wi-Fi Let’s get started 13. The AirMusic App will display a play screen for the radio station that you have selected. 14. Now that you have connected your Bluetooth speaker with Wi-Fi to the internet using the AirMusic control App, you can connect your speaker to internet radio each time to listen to your selected radio station, without using the App.
‘discoverable’ . Note: If necessary, refer to the instructions for your device to add or set up Bluetooth. 3. When found, your speaker will be displayed as ‘BUSH WiFi’ . Select the device name to begin pairing.
Note: If your previously paired device is within range but does not automatically connect, go to the Bluetooth connectivity settings on your device and select ‘BUSH WiFi’ to reconnect. 2. You can use the controls on your paired Bluetooth device as well as those on your speaker.
Page 22
Using your Bluetooth Speaker with Wi-Fi Let’s get started Aux in mode Check that your Bluetooth Speaker with Wi-Fi is in Aux in mode. If you are not already in Aux in mode, short press the Power/Mode button on the back of the speaker until you are in Aux in mode.
Page 23
This page is left intentionally blank section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Page 26
Audio output: 1 x 3W RMS WiFi: 802.11 b/g/n Bluetooth: Version 4.2 Pairing name: BUSH WiFi Profiles: HFPv1.5, A2DPv1.2, AVRCPv1.0 Frequency range: 2.400GHz-2.480GHz Aux in: 3.5mm stereo This product is intended for use within the UK. This equipment complies with the essential requirements of the Radio Equipment Directive 2014/53/EU.
Page 27
This page is left intentionally blank section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021. Other information...
Product support Help is always at hand Troubleshooting Unable to connect wirelessly to your router: • Check that you are able to connect successfully to your router using WiFi with another device, such as a computer, tablet or mobile phone. •...
Page 31
Product support Help is always at hand • The internet connection between the server (often located in another country) and you is slow. Some Internet Service Providers may fail to provide service in some geographical areas. You could use a computer to check if the internet radio station can be received.
Page 32
Product support Help is always at hand Reset You can reset your Bluetooth Speaker with Wi-Fi back to the factory default settings. Note: If you reset your product, your connection to your WiFi internet router and bluetooth devices will be deleted. 1.
Product support Help is always at hand Help and assistance If you require any technical guidance or find that your Bluetooth Speaker with Wi-Fi is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021*.
Product support Help is always at hand Disposal • Disposal of your old product. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. • When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2012/19/EC..
Call us now and activate your 12 month guarantee Thank you for choosing Bush. Your new product is guaranteed against faults and breakdowns for 12 months. Don’t forget to register it with us today so we can provide you with our best possible after-sales service and useful updates.
Need help?
Do you have a question about the Wi-768 and is the answer not in the manual?
Questions and answers