Belt Pouch; Error, Faults & Troubleshooting - Parkside PLEM 50 C3 Operation And Safety Notes

Belt pouch

Use the supplied belt pouch to protect the product when not in use.
Note: Belt pouch can be attached to the belt as shown in fig. E.
Error, faults & troubleshooting
Error Cause
code
204 Calculation error
220 Low battery
255 Received signal too
weak or measurement
time too long
256 Received signal too
strong
261 Out of measuring
range
500 Hardware error
Solution
Refer to user manual, repeat
the procedures.
Replace batteries or charge
the batteries.
Improve the reflective surface.
(Use white paper.)
Improve the reflective surface.
(Don't aim at strong light.)
Measuring the distance within
measurement range.
Switch on / off the product, if
the symbol still appears after
several times, please contact
with your dealer.
GB 27