Historical Memory; Calling Up A Stored Memory - Parkside PLEM 50 C3 Operation And Safety Notes

Historical memory

All measured and calculated values will be automatically stored in
the memory. The values are saved with their unit (length, area or
volume). Calculated values are stored together with the respective
individual values. There are a total of 100 memory locations avail-
able. As soon as all 100 memory locations are occupied, the oldest
memory record will be over-written by newest record.

Calling up a stored memory

Briefly press the memory button
memory. Memory icon
the respective memory location number will be shown on the
"memory location number row"
has entered the historical memory mode.
Note: The last saved record will always have the memory
location number 01 in the history.
Press the memory button
Press and hold the memory button
1.5 seconds will scroll down the memory record fast by jump-
ing the record from 10 to 20 to 30....100.
Note: The data record "100" will be shown on the display
as "00" (not ("100")).
to display the latest stored
9
will be displayed on the display and
27
to indicate that the product
19 b
again to go to next memory.
9
for more than
9
GB 25