Related Manuals for Geovent ASA-3
Summary of Contents for Geovent ASA-3
- Page 1 I N S T R U C T I O N M A N U A L A S A - 3 A N D A S A - 4 A R M Extraction arm ø50, ø80, ø100, ø125, ø160 og ø200 mm www.geovent.com Version 1.0 15.12.2022...
-
Page 3: Table Of Contents
9 kg ASA-06 2,0 m - ø 100 mm - w. damper 9 kg The GEOVENT ASA-3 Arm is the ideal Extraction Arm for the extraction of welding smoke, grinding dust, fu- ASA-12 3,0 m - ø 100 mm 10 kg mes, etc., where the well-being of the operator is in... - Page 4 ASA-13 3,0 m - ø 125 mm 10 kg ASA-17 3,0 m - ø 125 mm - w. damper 10 kg [Pa] ASA-3 2m ASA-3 arm 2m Tryktab 1400 ASA-23 4,0 m - ø125 mm 12 kg. ø125 ø160 ø200...
-
Page 5: Installation
1000 1200 1400 1600 1800 2000 2200 Luftmængde [m³/h] Air Flow (m The ASA-3 Arm is supplied partly assembled. Depen- ding on model, it may consist of 1 partly assembled car- 1.5 Construction rying arm, 1 hood and 1 set of hose with clamp. The... - Page 6 3. Mount the centre part by taking the supplied M12 bolt Table of dimensions - Arm through 3 disc springs, the alu half, the friction disc, Length the other alu half and 3 disc springs and fasten them [mm] [mm] [mm] [mm] [mm]...
-
Page 7: Optional Equipment
2000 2000 270° 359° 270° Then attach the spiral tube to the extension arm, using the self-drilling screws provided. The piece between the spiral tubes is assembled using the clamping strap and the supplied hose. The arm is then attached to the extension arm. -
Page 8: Connection
The electrical installation is to be carried out by a certi- fied electrician. 2.3 Trial run – exact adjustment After the final mounting, the ASA-3 Arm should be adju- sted to the typical working area, for optimum utilisation Always check that the correct volume of air is extracted of the Arm. -
Page 9: Liability
This declaration is no more valid if changes are made to User liability the product by others than the manufacturer. In order for Geovent to be capable of granting the decla- Authorized to collect the technical file: red warranty, the user/fitter must follow this instruction manual in all respects. - Page 12 HOVEDGADEN 86 • DK-8831 LØGSTRUP (+45) 8664 2211 • salg@geovent.dk...
Need help?
Do you have a question about the ASA-3 and is the answer not in the manual?
Questions and answers