Related Manuals for Geovent ASA-HV50
Summary of Contents for Geovent ASA-HV50
- Page 1 I N S T R U C T I O N M A N U A L A S A - H V 5 0 A S A - H V 5 0 Extraction arm for high vacuum Extraction arm for high vacuum Version 1.0 www.geovent.com 29.11.2022...
-
Page 3: Table Of Contents
3.1 Handling ....... .4 suppliers than Geovent, as this may hamper the product 3.2 Technical data . -
Page 4: Handling
3.1 Handling 5.0 Construction Always use gloves when you are handling this product. Wall bracket: Steel bracket, powder enamelled yellow Always lift the arm in the aluminum arm during transport in RAL 1007. The rotary joints can rotate 270°. and assembly. Be aware that it is possible to trap your fingers between Funnel: Light-weight aluminium funnel. -
Page 5: Mounting Of Optional Equipment
3. Center wrist checked and tightened if needed. Tigh- ten the joint so that the arm moves freely, but also so Alu centerfork fast that it can sustain itself in a slightly bent position. Ø114 friction discs 4. Mount the funnel on the outer joint by taking the supplied M8 bolt through 3 disc springs, the alu Center Alu inner arm... -
Page 6: Trial Run - Exact Adjustment
8.0 Dimensions Be especially aware that it is possible to squeeze your fingers at the gas spring. ASA-HV50 Move the hood to the wanted position and wait for the friction discs to locked the arm. In normal use, the arm can lift it self in the wanted positi- Center joint on. -
Page 7: Liability
Name: Thomas Molsen User liability In order for Geovent to be capable of granting the decla- red warranty, the user/fitter must follow this instruction manual in all respects. Signature: ____________________________ Under no circumstances may the products be chan- ged in any way, without prior written agreement with Geovent A/S. - Page 8 HOVEDGADEN 86 • DK-8831 LØGSTRUP (+45) 8664 2211 • salg@geovent.dk...
Need help?
Do you have a question about the ASA-HV50 and is the answer not in the manual?
Questions and answers