Spektrum AR7110 User Manual page 19

EN
JR X9303 2.4GHz
In System mode under device, activate the limiter program by selecting GOV under
the Gear channel. The RevLimit will then be controlled and adjusted via the Limiter
screen located in function mode. A target rpm is available for each flight mode. 0%
turns off the limiter, while the larger the value the higher the target rpm.
The Gyro Gain channel will plug into the Gear channel and the gyro screen will be
used to adjust the gyro gain. (See the X9303 manual for more detail on Gyro Gain
settings.)
JR 12X 2.4GHz
In System mode in code 17 Device Select, Assign the GOV to the gear channel.
This will activate the governor programming code 45 in the function mode. The
RevLimit will then be controlled and adjusted via the Governor screen code 45
located in function mode. A target rpm is available for each flight mode. 0% turns
off the limiter, while the larger the value the higher the target rpm.
19