Table of Contents
Advertisement
Timer
The timer can be used in two different ways:
To switch a hotplate off automatically
■
As a kitchen timer
■
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting a cooking time
The hotplate must be switched on.
Touch the
symbol for the required hotplate.
0
1.
in the timer display and the
Touch the desired preset in the range of settings. The
2.
possible presets from left to right are 1, 2, 3..... to 10 minutes.
PLQ
Slide your finger along the settings range repeatedly, within
3.
10 seconds, until the desired cooking time is reached.
The duration set is displayed for 10 seconds and then starts to
count down.
Automatic setting
If you touch settings range presets 1 to 5 for a longer time, the
cooking time automatically counts back down to one minute.
If you touch settings range presets 6 to 10 for a longer time,
the cooking time automatically counts up to 99 minutes.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
You will hear a signal and
10 seconds. The
display lights up brightly. Touch the
x
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
indicator flash alternately on the hotplate display.
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a wipe protection
function. Touch the
#
symbol. A signal sounds. The control
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
8
‹‹
x
display appears.
lights up in the display for
‹‹
and the
/
residual heat
" ‰
•
œ
hotplate settings range. The display goes out and the audible
signal ceases.
Changing or cancelling the duration
Touch the
0
cooking time or set to
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
lights up
Basic settings section.
Note: You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Touch the
0
cooking time or set to
Kitchen timer
PLQ
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings. The hob must be
switched on.
You can activate the kitchen timer on every hotplate that is
turned off.
Setting the kitchen timer
Touch the
1.
kitchen timer lights up.
Set the desired time in the settings range.
2.
The timer starts counting down after a few seconds.
When the cooking time has elapsed
A signal sounds once the time has elapsed.
the timer display. The
brightly. After 10 seconds, the display switches off.
Changing the time
Touch the
0
or set to
‹‹
Note: If you have switched on the kitchen timer, the associated
hotplate is locked. You must first switch off the kitchen timer
and then set the hotplate.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
Note: The main switch is excluded from the wipe protection
function. You can switch off the hob at any time.
symbol for the required hotplate. Change the
‹‹
in the settings range.
symbol for the required hotplate. Change the
‹‹
in the settings range.
0
symbol for the hotplate. The
lights up on the timer display.
‹‹
U
display for the kitchen timer lights up
symbol for the required hotplate. Change the time
on the settings range.
U
display for the
lights up on
‹‹
Advertisement
Table of Contents
