Westinghouse WVE612 User Manual page 24

USING YOUR OVEN (CONTINUED)
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1. Switch off the appliance using the function
selector switch.
2. Touch and hold the
time until the word 'SAFE' is displayed and a double
beep is sounded. The word SAFE will be replaced by
a padlock symbol on the display after 5 seconds.
Releasing the child-proof lock
Touch and hold the
time until a double beep is sounded. This will commence
to unlock the door and after 5 seconds the oven is ready
for use.
Activating the function lock
The active function can be locked so it is not changed
unintentionally.
1. The active function can be locked, to activate touch
and together until 'Loc' is displayed.
2. If the oven is switched off while in 'Loc' it will switch
into Child lock mode and the display will show 'SAFE'.
3. Oven can be released the same way as 'Releasing the
child proof lock'
Safety Cut-out feature
The oven automatically switches itself off if the
temperature is not adjusted or the appliance is left
operating after a period of time. The oven switches itself
off after:
• 12.5 hours when the temperature is set less than
120°C.
• 8.5 hours when the temperature is set to 120°C
or above, and below 200°C.
• 5.5 hours when the temperature is set to 200°C or
above, and below 250°C.
• 3.0 hours when the temperature is set at 250°C.
DEMO Mode
The oven can be set to operate in a demo mode (e.g. in a
retail store). In this mode the display works and functions
can be set but the oven does not actually heat. When
in this mode the text 'DEMO' will be lit. The following
instructions show how to enter and exit 'Demo' mode.
1. Ensure the oven is in the off state. Toggle and hold
the selector to
text will begin to flash.
2. Toggle the temperature selector to set the first digit
of display to 2. Touch clock to set.
3. Repeat step 2 until display shows 24:68. 3 beeps
sound and DEMO will be shown.
4. To disable DEMO mode repeat steps 1-3.
24
USING YOUR OVEN
and buttons at the same
and buttons at the same
until a beep sounds. The 'DEMO'
Pyrolytic cleaning of the oven cavity
The oven has the Pyrolytic self-cleaning function. It
cleans by burning off the spatters and accumulated dirt
and grease from the oven liner, at high temperature. This
process produces ash which can then be wiped out of the
oven cavity.
Pyrolytic cleaning will not remove salt and mineral
residue left in the cavity well when water evaporates.
It is recommended that the residue is cleaned prior
to conducting pyrolytic cleaning cycles. See section
'Cleaning the cavity well'.
WARNING
During the pyrolytic cleaning process the oven becomes
extremely hot.
• Please keep small children at a safe distance.
• Never clean non-stick baking trays and tins in the
oven during the pyrolytic cycle. High temperatures
damage the non-stick coating and poisonous gas
is released.
• To prevent damage, do not use acids, sprays or
similar cleaning agents.
CAUTION
• During pyrolytic cleaning the air outlet exhaust
above the door must be kept clear of any
obstruction (e.g. bulky tea towels).
• Do not use the oven to clean miscellaneous items
(e.g. cookware).
Pyrolytic cleaning (WVEP618 model only)
Before carrying out the Pyrolytic function
1. Turn off the oven and wait until it is cold.
2. Remove all accessories.
3. Clean th eoven floor and the inner door glass with
warm water, a soft cloth and a mild detergent.
Do not fill the water tank during cleaning. It restarts
the cleaning cycle.