Cleaning And Care - YMGI 86 Series Installation Instructions & User Manual

Symphony solar dc inverter single zone 09-24k, 24 & 48v dc solar powered cooling and heat pump
Table of Contents

Advertisement

CLEANING AND CARE

Turn the unit power off and unplug the power cord before cleaning the air conditioner. Failure to do so can result in
electric shock.
Never sprinkle water on the indoor unit for cleaning because it can cause an electric shock.
Volatile liquids (e.g. thinner or gasoline) will damage the air conditioner. (So, wipe the units with a dry soft cloth, or a
cloth slightly moistened with water or a mild nonabrasive cleanser.)
CLEAN THE FRONT PANEL (MAKE SURE TO TAKE IT OFF BEFORE CLEANING)
Take off the front panel
Along the direction of arrows, lift the front panel up, meanwhile hold both slots of the front panel and remove.
Washing
Clean with a soft brush, water and neutral detergent and then dry it. (Note: Before cleaning the unit, please remove the
display box first, then wash the panel. (If the unit has displayed on the front panel.) Never use water that has a
temperature above 113°F to wash the panel or it could cause deformation or discoloration.)
Install front panel
Place two supports of the front panel into the slots, along the direction of arrows to cover and clasp the front panel. As
show in figure.
YMGI: Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
56

Advertisement

Table of Contents
loading

Table of Contents