Why Does Ymgi Group Require Installation And Service To Be Performed 100% By Currently Licensed Or Certified Hvac Technicians/Contractors; Suggestions To Aid You In Hiring An Hvac Contractor - YMGI 86 Series Installation Instructions & User Manual

WHY DOES YMGI GROUP REQUIRE INSTALLATION AND SERVICE TO BE PERFORMED 100%
BY CURRENTLY LICENSED OR CERTIFIED HVAC TECHNICIANS/CONTRACTORS?
1. Expertise and Safety:
They have the training and experience to accurately and safely install and service your equipment. The equipment runs
with high-pressure refrigerant, oil and electrical current. The copper lines must be installed properly to prevent leakage
and foreign substances from contaminating the refrigerant system.
2. You will save money in the long run:
If any problem occurs with the unit that has been fully installed by a currently licensed or certified technician/contractor,
contact the original licensed or certified HVAC technician to evaluate the unit as they have the training and experience
to correct the problem quickly and efficiently. A technician may be unwilling to repair an issue on a unit that they did not
install. If you do find a technician willing to perform this service, there is an increased possibility of higher service fees,
increased service visits, or delayed service from that technician.
3. It's the law!
The federal, state and/or local government and authorities have various governing laws or regulations, guidelines,
ordinances, etc. These laws may require only licensed or certified professionals can install and service this type of high
pressure HVAC equipment.

SUGGESTIONS TO AID YOU IN HIRING AN HVAC CONTRACTOR:

1. Hire a currently practicing, licensed/certified HVAC professional technician/contractor. Technicians, who are no longer
practicing (retired, etc.) in this field, may not have current technical knowledge or may lack experience on the equipment
you have purchased.
2. Hiring a licensed technician to install your unit as a "side job" and not hiring a licensed HVAC company may pose possible
risk. This may result in an incomplete or unsatisfactory installation, no guarantee for workmanship and lack of
maintenance and further service to your unit.
3. Hire a technician/contractor who services customers in your local area and one you are familiar with. Local contractors
have a faster response time and it will be easier for you to determine if they are reputable.
4. Use only a reputable licensed/certified HVAC installation professional to prevent any unexpected charges because of
unethical business practices.
5. Check their references, verify they provide professional service for their customers. N.A.T.E or A.C.C.A certified
technicians are strongly recommended.
6. Some contractors/technicians may not feel comfortable about installing equipment that has been purchased by someone
other than themselves. They prefer to purchase and install the equipment themselves. You can contact YMGI directly
to check and see if there are contractors in your area who have installed our products or any similar products.
7. Ask for a detailed quote for the complete installation project. A flat rate quote is the safest contract for both you and the
contractor.
8. Local HVAC technicians may charge you on a project basis or on an hourly basis. It has been our general experience;
a full single head installation normally can cost $800 to $1500. These costs are estimates, and your actual costs
may differ due to your specific job requirements and installation location.
9. Number of hours can vary depending upon each individual situation, some factors are, but not limited to:
 Difficulty or complexity of securely installing the indoor unit.
 Difficulty or length of the inter-connecting pipes and wires to be installed.
10. A successful installation is dependent on all these suggestions and all the necessary steps are followed.
11. If the contractor(s)/technician(s) are experienced with the systems/brands you purchased. You might save on the
installation cost, but remember to always ask for and verify references.
12. The contracts should list and detail all work to be performed and the standards they will follow. Some contractors are
willing to include a 1-year installation/service warranty at no extra charge. Check to see if this is an available option. If
available, make sure it is included in the contract.
13. Verify and confirm the installation is completed and all the unit functions have been tested and working properly. All
items on the checklist should be checked and clearly marked in the warranty registration card/form, prior to paying the
contractor in full.
The cost of not having your unit professionally installed can be more expensive than the additional cost of hiring a certified
contractor. Protect your investment and warranty eligibility by doing it right the first time.
YMGI: Your Modern Green Idea
YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World!
11